Work Order Template

Type the customer, the site, the problem and the work to be done, then add labor and parts. A clean work order builds itself as you go, with the totals worked out and a place for the customer to sign off. Save it as a PDF or print it. There is no account, and nothing you type leaves your browser.

Kind of work

Fills in an example problem, labor and parts. They are placeholders, not market prices: overwrite every one with your own.

Your business

Remembered in this browser for next time. Nothing you type here is uploaded or sent anywhere.

Customer and site

Where the work happens. Add the unit, room or equipment if that helps the technician find it.

Work order details

Leave empty to write it in later.

The job

What the customer reported or asked for, in their words.

What the technician will do about it, step by step if it helps.

Labor

Hours times the hourly rate, rounded to the cent on each line.

Labor 1

Line total $47.50

Labor 2

Line total $285.00

Parts and materials

Quantity times unit price, rounded to the cent on each line.

Part 1

Line total $780.00

Part 2

Line total $65.00

Tax

Leave at 0 for no tax line.

Completion and sign-off

Fill these in when the job is done, or leave them empty and write on the printout.

What was done, what was found, readings taken and anything to follow up.

Prints a place for the technician and the customer to sign and date.

Save your work order

6 fields still say"Example". The example text, hours and prices are placeholders, not market rates. Replace them with your own before you hand this to anyone.

Your business name

Work order

No.
WO-1001
Type:
Repair
Priority:
Normal

Customer

Customer name

Site

Where the work happens

Requested
Scheduled
Assigned to

Problem or request

Example: Water heater is leaking from the bottom of the tank and there is no hot water.

Work to be done

Example: Shut off water and gas, drain and remove the old unit, install the new water heater, test for leaks and correct operation.

Labor
DescriptionAmount
Example: Diagnose the leak and confirm the tank has failed0.5 h x $95.00$47.50
Example: Remove the old unit and install the new one3 h x $95.00$285.00
Parts and materials
DescriptionAmount
Example: Water heater, 40 gallon1 x $780.00$780.00
Example: Supply lines and fittings1 x $65.00$65.00
Labor (3.5 hours)
$332.50
Parts and materials
$845.00
Total
$1,177.50

Completion notes

Filled in when the job is done. Left empty, the printout has lines to write on.

Customer sign-off: the work described above has been completed to my satisfaction.

Technician signature
Date
Customer signature
Date
How the totals are worked out

Each labor line is its hours times its hourly rate. Each parts line is its quantity times its unit price. Both are rounded to the cent, then added up into a labor subtotal and a parts subtotal.

Tax is your rate times the parts subtotal, or times parts plus labor if you choose that. The total is labor, plus parts, plus tax. All the math is done in whole cents and half a cent rounds up.

Your work order is built in this browser. Nothing is uploaded, and no account or email is needed.

Example: a filled-in repair work order

This sample repair work order has 2 labor lines that come to 3.5 hours and $332.50, and 2 parts lines that come to $845.00. Tax of 6% on the parts adds $50.70, so the total is $1,228.20. Every name, hour and price in it is a placeholder that shows the layout, not a market rate.

Your Service Company (sample)

100 Sample Street Your City, ST 00000 (555) 010-0100 office@example.com

Work order

No.
WO-1001
Type:
Repair
Priority:
High

Customer

Sample Customer

(555) 010-0199

Site

200 Example Avenue Your City, ST 00000

Requested
November 18, 2026
Scheduled
November 20, 2026
Assigned to
Sample Technician

Problem or request

Example: Water heater is leaking from the bottom of the tank and there is no hot water.

Work to be done

Example: Shut off water and gas, drain and remove the old unit, install the new water heater, test for leaks and correct operation.

Labor
DescriptionAmount
Example: Diagnose the leak and confirm the tank has failed0.5 h x $95.00$47.50
Example: Remove the old unit and install the new one3 h x $95.00$285.00
Parts and materials
DescriptionAmount
Example: Water heater, 40 gallon1 x $780.00$780.00
Example: Supply lines and fittings1 x $65.00$65.00
Labor (3.5 hours)
$332.50
Parts and materials
$845.00
Sales tax (6%) on parts
$50.70
Total
$1,228.20

Completion notes

Sample only. Old unit removed and new unit installed and tested. Every name, hour and price here is a placeholder to show the layout, not a market rate.

Completed: November 20, 2026

Customer sign-off: the work described above has been completed to my satisfaction.

Technician signature
Date
Customer signature
Date

What a work order is for

A work order is a written instruction to do one specific job, and the record of how that job went. It answers what a technician would otherwise phone the office to ask: where the job is, what is wrong and what to do about it. When the job is done, the same sheet shows the hours and parts that went into it and carries the customer's signature.

What every work order needs

  • A number. One running sequence, so any job can be found again by its number.
  • Customer and site. Who the job is for and where the work happens, which is often not the billing address.
  • Dates and priority. When the work was requested, when it is scheduled, and how urgent it is.
  • Who is assigned. One named technician, so there is no doubt whose job it is.
  • The problem and the work. What was reported, in the customer's words, and what is to be done about it.
  • Labor. Each task with its hours and hourly rate.
  • Parts and materials. Each item with its quantity and unit price.
  • Tax and total. Worked out from the lines, not typed in by hand.
  • Completion notes and sign-off. What was done and found, and signatures from the technician and the customer.

How the total is worked out

Each labor line is hours times the hourly rate, and each parts line is quantity times the unit price. The labor lines add up to a labor subtotal and the parts lines to a parts subtotal. Tax is your rate times the parts subtotal, or times parts plus labor if that is how your state treats the job. The total is labor plus parts plus tax.

Here is the sample repair shown above, worked by hand. Labor is 0.5 hours plus 3 hours at $95.00 an hour, which is $47.50 plus $285.00, or $332.50. Parts are $780.00 plus $65.00, or $845.00. Tax of 6% on the parts is $50.70. The total is $332.50 plus $845.00 plus $50.70, which is $1,228.20. Those hours, prices and the tax rate are placeholders that show the math, not market rates, so type your own.

Maintenance, repair and installation

A repair work order starts from a fault, so the problem description and what the technician found matter most. A maintenance work order starts from a schedule, so it reads like a checklist and the completion notes hold the readings. An installation work order starts from a request, so the work description and the parts list carry the detail.

Common mistakes on work orders

  • A vague problem. "Fix AC" sends a technician out without the right part. Write what the customer reported and when it happens.
  • No priority. Without one, every job looks the same and the urgent one waits in the pile.
  • Hours written down later. Fill in labor on site, while it is fresh, or the work order and the invoice will not agree.
  • No sign-off. A signature and date on the day is the simplest proof that the job was done and accepted.
  • Example text left in. The presets are a starting point, and the tool warns you while any field still says "Example".

Fill it in now or on site

Complete the whole sheet here and save it as a PDF, or fill in only the top half and print it for the technician. An empty completion section prints with ruled lines to write on, and the signature lines are ready for the customer.

When paper work orders start to slip

Paper works while one person hands out the jobs and sees every sheet come back. It slips when customers call to ask where their job stands, or when a signed sheet sits in a truck for a week before anyone bills it. A customer portal fixes that part: the customer sends the request, sees the status change as the job moves, and pays at the end, all in one login. See how that looks for a service company on our page about customer portals for HVAC companies.

Common Questions

What is a work order?

A work order is the document that tells someone to do a specific job and records what was done. It says who the job is for, where it is, what the problem is, what work is to be carried out, who is assigned, and what labor and parts went into it. A maintenance team uses it to hand out tasks, and a service business uses it to send a technician to a customer and get the finished job signed off.

What should a work order include?

A work order number, the customer and the site address, the date the work was requested and the date it is scheduled, the priority, the assigned technician, a description of the problem, the work to be done, labor with hours and rate, parts and materials with quantity and price, tax, the total, notes on what was completed and a sign-off line. The template has a field for each of these and leaves out any line you keep empty.

What is the difference between a work order and an invoice?

A work order authorizes and describes the job, and travels with the technician while the work is done. An invoice asks for payment after the job. The labor and parts lines are often the same on both, which is why a filled-in work order makes the invoice quick to write. Some small shops hand the signed work order to the customer as the bill, but an invoice also needs payment terms and a due date, so most keep the two separate.

What is the difference between a work order and a purchase order?

A work order is about work: it tells your own team or a contractor what job to do. A purchase order is about buying: it tells a supplier what goods you want, how many and at what price. One job can need both, a work order for the repair and a purchase order for the part you have to order in.

What is the difference between a work order and a quote or estimate?

A quote or an estimate comes first and tells the customer what the job is expected to cost. The work order comes after they say yes and tells the technician what to do. If you have not priced the job yet, start with the quote template on this site, then copy the agreed lines into a work order.

How should I number work orders?

Use one running sequence and never reuse a number, so every job can be found later. A short prefix helps, such as WO-1001, WO-1002 and so on, and some businesses add the year. The template starts at WO-1001, and the Start the next work order button moves to the next number and keeps your business details.

Can I use this for maintenance, repair and installation work?

Yes. Pick Repair, Maintenance or Installation and the template fills in an example problem, work description, labor lines and parts lines for that kind of job, or pick Blank to start from nothing. Every example description, hour and price is a placeholder to overwrite, not a market rate, and the tool counts the fields that still say Example so none of them reach a customer.

Is this work order template really free, and where does my information go?

It is free, with no sign-up and no email field. The work order is built in your browser and nothing is uploaded. Your business details and your last draft are stored only in that browser so they are there next time, and the Clear everything button removes them.

Baseline Customer Portal

One place for your customers to see quotes, orders and invoices

The baseline portal replaces scattered emails, spreadsheets and phone calls with one login for your customers. The $999 setup tailors it to how your business runs. The $299 a month covers hosting, management and ongoing changes, with payments landing directly in your own Stripe account. Integrations and custom features beyond the baseline are quoted before we start them.

  • A customer portal with intake, quotes, orders and payments already wired together
  • Setup tailored to your services, statuses and intake fields
  • Separate views for customers, staff and production
  • Automatic emails when a quote is ready, a status changes or an invoice is due
  • Hosting, management and ongoing changes
$299a month

Plus $999 one-time setup, charged with the first month.

Turnaround: Days, not months. We confirm your launch date on the kickoff call.

You pay on Stripe's secure checkout page. We never see your card number.