Quote Template

Type your business, your customer and your line items, and a clean quote builds itself as you go. Save it as a PDF or print it. There is no file to download and no account, and nothing you type leaves your browser.

Trade

Fills in example line items and terms. They are placeholders, not market prices: overwrite every one with your own.

Your business

Remembered in this browser for next time. Nothing you type here is uploaded or sent anywhere.

Customer

Quote details

How long you will hold this price. Clear it to leave the line off.

Printed under the job title. Leave it empty to leave it off.

Line items

Quantity times unit price, rounded to the cent on each line. Start a description with "Labor:" or "Parts:" and the document adds a subtotal for each.

Line 1

Line total $1,200.00

Line 2

Line total $2,600.00

Line 3

Line total $1,850.00

Line 4

Line total $2,400.00

Discount, tax and deposit

All optional. Leave them off and the document shows a plain total.

Leave at 0 for no tax line. Rates and what is taxable depend on your state and city.

Some states limit the deposit a contractor may ask for. Check the rule where you work.

Terms and notes

A starting point in plain words, not legal advice. Edit it to match how you work and the rules in your state.

Prints a place for the customer to sign and date to accept the quote.

Save your quote

5 lines still say "Example". The example descriptions and prices are placeholders, not market rates. Replace them with your own before you send this.

Your business name

Quote

No.
Q-1001

Prepared for

Customer name

Job

Example: Kitchen remodel

Line items
DescriptionAmount
Example: Demolition and haul-away1 x $1,200.00$1,200.00
Example: Framing and drywall, labor (per hour)40 x $65.00$2,600.00
Example: Materials: lumber, drywall, fasteners1 x $1,850.00$1,850.00
Example: Finish carpentry and paint1 x $2,400.00$2,400.00
Subtotal
$8,050.00
Total
$8,050.00

Terms

This quote is a fixed price for the work listed above and holds until the date shown. Work outside this scope is priced separately and agreed in writing before it starts. The deposit, if one is shown, is due on acceptance and the balance is due on completion. Permits are included only where listed. Changes to the scope are priced and approved in writing before the extra work starts.

To accept this quote, sign and date below and return a copy.

Customer signature
Date
How the totals are worked out

Each line is its quantity times its unit price, rounded to the cent. The subtotal is the sum of the lines.

A discount comes off the subtotal first. Tax is then charged on what is left of the lines marked taxable, so a discount lowers the tax too. The total is the subtotal, minus the discount, plus the tax.

A percentage deposit is a share of the total with tax included, and the balance is the total minus the deposit. All the math is done in whole cents and half a cent rounds up.

Your quote is built in this browser. Nothing is uploaded, and no account or email is needed.

Example: a filled-in roofing quote

This sample roofing quote has 4 line items that add up to $10,410.00. A 5% discount takes off $520.50, so the total is $9,889.50. A 10% deposit of $988.95 is due on acceptance, which leaves a balance of $8,900.55. Every name and price in it is a placeholder that shows the layout, not a market rate.

Your Roofing Company (sample)

100 Sample Street Your City, ST 00000 (555) 010-0100 office@example.com

License: Your license number

Quote

No.
Q-1001
Date:
November 17, 2026
Valid until:
December 17, 2026

Prepared for

Sample Customer

200 Example Avenue Your City, ST 00000 customer@example.com

Job

Example: Roof replacement

Line items
DescriptionAmount
Example: Tear off existing shingles and dispose (per square)24 x $95.00$2,280.00
Example: Shingles, underlayment and flashing, installed (per square)24 x $310.00$7,440.00
Example: Replace damaged decking (allowance, per sheet)4 x $85.00$340.00
Example: Permit and cleanup1 x $350.00$350.00
Subtotal
$10,410.00
Discount (5%)
-$520.50
Total
$9,889.50
Deposit due on acceptance (10%)
$988.95
Balance
$8,900.55

Terms

This quote is a fixed price for the work listed above and holds until the date shown. Work outside this scope is priced separately and agreed in writing before it starts. The deposit, if one is shown, is due on acceptance and the balance is due on completion. Hidden damage found after tear-off, such as rotted decking, is charged at the allowance rate shown and approved with you before repair. Manufacturer and workmanship warranty details are provided in writing.

Notes

Sample only. Every name and price here is a placeholder to show the layout, not a market rate.

To accept this quote, sign and date below and return a copy.

Customer signature
Date

What a quote is

A quote is a fixed price for a defined job, written down and good until a stated date. The customer can say yes to it as it stands, which is what separates it from an estimate. That is also why the details matter: once it is accepted, both sides are working from what the page says.

What every quote needs

  • Who it is from. Your business name, address, phone and email, and your license number if your trade has one.
  • Who it is for. The customer's name and the address where the work happens.
  • A number and two dates. A quote number so you can both refer to it, the date you wrote it, and the date the price holds until.
  • Line items. Each part of the job on its own line with a quantity and a unit price, so the customer can see what they are paying for.
  • The math, in order. Subtotal, then any discount, then tax, then the total, then the deposit and the balance.
  • Terms. What is included, what is not, how changes are priced, and when payment is due.
  • A place to sign. A signature and date line turns "sounds good" into a clear yes.

The template has a field for each of these and leaves out any line you keep empty.

Quote or estimate: which one to send

Send a quote when you have seen the whole job and can commit to a price. Send an estimate when part of the job is still hidden, and say how far the final cost could move. If you are at that earlier stage, use the estimate template: it is the same form with estimate wording and an expected range, and it already knows your business details.

Common mistakes on quotes

  • One lump sum. A single figure invites haggling over the whole price. Line items let the customer drop one part of the job without reopening the rest.
  • No expiry date. Without one, a customer can come back months later, after your costs have gone up, expecting the old price.
  • Vague descriptions. "Repair roof" can mean anything. Say what is replaced, how much of it and with what.
  • Nothing about surprises. Say what happens if you find damage nobody could see, and that extra work is priced and approved before it starts.
  • Unclear payment terms. State the deposit, when the balance is due and how you take payment.
  • Example text left in. The trade presets are a starting point. The tool counts the lines that still say "Example" so none of them reach a customer.

Tax and deposits depend on where you work

The template does not assume a tax rate, because there is no single one. The Tax Foundation counts 45 states with a state-level sales tax and 38 that allow local sales taxes on top, so the rate depends on where the work is done. Enter your own rate, then use the switch on each line to say whether tax applies to it. Whether labor, materials or both are taxed on your kind of job is a question for your state's tax agency.

Deposits have rules too. The FTC notes that some states limit the down payment a contractor can ask for, so check yours before you set a percentage. None of this is legal or tax advice.

Quote templates by trade

The builder on this page works for any business. These pages open the same builder already set up for one trade, each with its own line items, sample and notes on what customers of that trade look for:

Before you set a price, the markup calculator shows what your markup leaves you as margin. Once the job is done, bill it with the invoice template.

If you send quotes every week

Typing each quote by hand works until the requests pile up. A form on your own website can ask the customer the same questions, work out the price from your rates and email them the quote while you are on a job. You can build one yourself with the free Form Kit, or have us set it up for you with the offer below. And if the website itself is the weak spot, we build websites for local businesses with that kind of form already in place.

Common Questions

What should a quote include?

Your business name and contact details, the customer's name and the job address, a quote number and date, each item of work with its quantity and price, any discount, tax and deposit, the total, the date the price holds until, and your terms. For home improvement work the Federal Trade Commission tells consumers that a written estimate should include a description of the work to be done, materials, completion date and the price, so expect a customer to look for those four.

Is a quote legally binding?

It can be. A quote is normally a firm price for a defined job, and Cornell Law School's Legal Information Institute puts the general rule this way: when a valid offer is made, an acceptance by the offeree creates a binding contract. Whether your quote counts as an offer depends on how it is worded and on the rules where you work, which the FTC notes vary by state. This is general information, not legal advice, so have a lawyer read your terms before a large job.

What is the difference between a quote and an estimate?

A quote is a fixed price for a defined job that holds until a stated date. An estimate is an approximate cost that can change once the full job is known. Send an estimate while you still cannot see everything, such as what is behind a wall or under old shingles, and a quote once you can. The estimate template on this site is the same tool with estimate wording and an expected range.

How long should a quote be valid?

There is no standard period. Pick a date you can hold your prices to, which depends on how quickly your material and labor costs move. The template sets the date 30 days after today as a starting point, and you can change it or clear it.

Should I ask for a deposit on a quote?

A deposit covers materials you buy before the job starts and shows the customer is committed. Check your state's rule first: the FTC notes that some states limit how much a contractor can ask for as a down payment. California's contractor board, for example, says a home improvement down payment should never exceed 10 percent of the contract price or $1,000, whichever is less.

What is the difference between a quote and an invoice?

A quote comes before the work and says what it will cost. An invoice comes after the work, or at an agreed stage of it, and asks for payment. The line items are often the same, which is why a clear quote makes the invoice quick to write.

Can I use this as a roofing or contractor quote template?

Yes. Pick Roofing or General contractor in the trade list and the template fills in example lines and terms for that kind of job, such as tear-off and shingles per square with an allowance for damaged decking. There are also presets for plumbing, HVAC, electrical, landscaping, painting and cleaning, and a blank one. Every example description and price is a placeholder to overwrite, not a market rate.

Is this quote template really free, and where does my information go?

It is free, with no sign-up and no email field. The quote is built in your browser and nothing is uploaded. Your business details and your last draft are stored only in that browser so they are there next time, and the Clear everything button removes them.

Online Quote Form Setup

Let your website write the quote

You just worked out a price by hand. This puts your price list to work on your website: a customer answers a few questions, the form works out the price from your own rates, and they get an itemized quote by email while you get the request. We set it up from your price list and host it for you, so there is no monthly fee to us.

  • One quote request form for your business, with up to 10 questions and up to 15 priced items or options from your own price list
  • The price worked out from your rates the moment the customer submits, with no reply needed from you
  • An itemized quote emailed to the customer in your business name and colors, and an alert to you with every answer
  • Every request saved to a Google Sheet that you own
  • Added to your current website as an embed or a button, or delivered as its own page, with one round of changes
$395one time

Turnaround: Live within 5 business days of getting your price list and logo.

You pay on Stripe's secure checkout page. We never see your card number.