Flooring Calculator
Enter your rooms and pick the flooring. You get the square feet to buy with a waste allowance for that material, the number of boxes from your carton's coverage, and underlayment rolls.
Decimals are fine: 10 ft 6 in is 10.5.
Leave at 0 if you do not need it.
Leave at 0 if you do not need it.
A kitchen island, a hearth or built-in cabinets the floor stops at.
Boards at an angle to the walls need more cuts. Turning this on raises the waste allowance.
Example value. Use the number printed on your carton.
Counted on the floor area, without the waste allowance.
Example value. Use the number on the roll.
Leave at 0 to skip cost.
Printed on the saved result.
Flooring estimate
Your flooring order
Laminate to buy
18 boxes
312 sq ft of floor plus 10% waste is 343.2 sq ft. Whole boxes give you 360 sq ft.
Floor area
312 sq ft
Underlayment rolls
4
| Material | Quantity |
|---|---|
| Floor area15 x 12 ft + 12 x 11 ft | 312 sq ft |
| Laminate with waste10% added for cuts | 343.2 sq ft |
| Boxes20 sq ft per box, 360 sq ft in all | 18 boxes |
| Underlayment312 sq ft of floor, 100 sq ft per roll | 4 rolls |
How we calculated this
Area.Each room's length times its width, added together, minus the area you asked to leave out.
Waste. Picking a flooring type sets a starting allowance from published installation guidance: 5% for hardwood (10% diagonal), 10% for laminate (20% diagonal), 10% for vinyl plank (15% diagonal) and 10% for carpet. You are using 10% for laminate. Raise it for small rooms, many doorways or a lower grade of wood.
Boxes. The area with waste divided by the square feet in one box, rounded up to whole boxes. Box coverage differs by product, so type the number printed on the carton.
Underlayment. The floor area, without the waste allowance, divided by what one roll covers. Skip it when the plank has a pad attached and the maker does not call for more.
What this is not. A count for rectangles. It does not plan seams, board direction, transitions, stairs or trim.
Sources for the figures used, all opened on November 20, 2026:
- AHF Products (Bruce, Armstrong Flooring), engineered hardwood installation instructions, cutting and grading allowance, checked 2026-11-20
- Pergo Extreme rigid vinyl plank installation instructions (Uniclic), checked 2026-11-20
- Inch Calculator, Flooring Calculator (waste by installation), checked 2026-11-20
- Inch Calculator, Carpet Calculator (roll widths, square yards, waste), checked 2026-11-20
Example: laminate in a living room and a bedroom
A 15 x 12 ft living room and a 12 x 11 ft bedroom come to 312 sq ft. Laminate with 10% waste needs 343.2 sq ft, which is 18 boxes at 20 sq ft a box, plus 4 rolls of underlayment at 100 sq ft a roll.
Example flooring order
Laminate to buy
18 boxes
312 sq ft of floor plus 10% waste is 343.2 sq ft. Whole boxes give you 360 sq ft.
Floor area
312 sq ft
Underlayment rolls
4
| Material | Quantity |
|---|---|
| Floor area15 x 12 ft + 12 x 11 ft | 312 sq ft |
| Laminate with waste10% added for cuts | 343.2 sq ft |
| Boxes20 sq ft per box, 360 sq ft in all | 18 boxes |
| Underlayment312 sq ft of floor, 100 sq ft per roll | 4 rolls |
How we calculated this
Area.Each room's length times its width, added together, minus the area you asked to leave out.
Waste. Picking a flooring type sets a starting allowance from published installation guidance: 5% for hardwood (10% diagonal), 10% for laminate (20% diagonal), 10% for vinyl plank (15% diagonal) and 10% for carpet. You are using 10% for laminate. Raise it for small rooms, many doorways or a lower grade of wood.
Boxes. The area with waste divided by the square feet in one box, rounded up to whole boxes. Box coverage differs by product, so type the number printed on the carton.
Underlayment. The floor area, without the waste allowance, divided by what one roll covers. Skip it when the plank has a pad attached and the maker does not call for more.
What this is not. A count for rectangles. It does not plan seams, board direction, transitions, stairs or trim.
Sources for the figures used, all opened on November 20, 2026:
- AHF Products (Bruce, Armstrong Flooring), engineered hardwood installation instructions, cutting and grading allowance, checked 2026-11-20
- Pergo Extreme rigid vinyl plank installation instructions (Uniclic), checked 2026-11-20
- Inch Calculator, Flooring Calculator (waste by installation), checked 2026-11-20
- Inch Calculator, Carpet Calculator (roll widths, square yards, waste), checked 2026-11-20
How to calculate flooring
Flooring to buy is the floor area in square feet plus a waste allowance, rounded up to whole boxes. Measure each room wall to wall at its longest and widest points, multiply the two and add the rooms together.
The formula, step by step:
- Floor area = length x width for each room, added up, minus anything the floor stops at.
- Flooring needed = floor area x (1 + waste percent).
- Boxes = flooring needed divided by the square feet in one box, rounded up.
- Underlayment rolls = floor area divided by the coverage of one roll, rounded up.
A worked example
A living room is 15 x 12 ft and a bedroom is 12 x 11 ft. That is 180 sq ft plus 132 sq ft, so the floor area is 312 sq ft. Laminate laid straight starts at 10% waste, so the flooring needed is 343.2 sq ft. If the carton says 20 sq ft a box, 343.2 divided by 20 is 17.16, so you buy 18 boxes and get 360 sq ft. Underlayment at 100 sq ft a roll is 312 divided by 100, which rounds up to 4 rolls.
Why the waste allowance differs by flooring type
Every plank that meets a wall is cut, and the offcut is only useful if it is long enough to start another row.
- Hardwood. Boards come in random lengths, so offcuts are easy to reuse. Manufacturers add an allowance for cutting and for boards you set aside for grade, and the published figure is 5%, or 10% laid diagonally.
- Laminate and vinyl plank. Planks are one fixed length and a short offcut often cannot start the next row, so more is lost. The published figure is 10%, and 15% to 20% laid diagonally.
- Carpet. The loss comes from the roll width, not from cutting planks. A 10 ft wide room cut from a 12 ft roll leaves a 2 ft strip the full length of the room that you still pay for.
Rooms change the number too. A small room or a hallway has more wall per square foot, so cuts are a bigger share. Doorways, closets, angled walls and floor vents all add cuts. If the same flooring runs through several rooms without a break, plan the layout before you trust any percentage.
What to check on the carton
- Square feet per box. The number this calculator needs. It is not the same across products, or even across widths of one product.
- Lot or run number. Buy the whole job from one run where you can, so the color matches.
- Attached pad. If the plank has one, the manufacturer may not allow a second underlayment.
- Acclimation. Many wood and laminate floors must sit in the room before installation. The instructions say how long.
From a material count to a price
A material count is the first line of a flooring quote, not the whole quote. Add transitions, trim, floor prep, removal of the old floor and your labor, then apply your markup. If you send the same kind of quote every week, the estimate template saves the retyping.
Common Questions
How much flooring do I need?
Multiply each room's length by its width, add the rooms together, then add a waste allowance for cuts. A 15 x 12 ft living room and a 12 x 11 ft bedroom are 312 sq ft. With 10% waste that is 343.2 sq ft, which is 18 boxes if a box covers 20 sq ft. The calculator does the same math for up to four rooms.
How much extra flooring should I buy for waste?
It depends on the material and the layout. AHF Products' hardwood instructions say to add 5% for cutting and grading and 10% for a diagonal installation. Pergo's rigid vinyl plank instructions say 10% for a standard installation and 15% for diagonal. Inch Calculator gives 10% for a standard laminate installation and 20% for diagonal or herringbone. For carpet, 10% is the common starting point.
How many boxes of flooring do I need?
Divide the square feet you need, waste included, by the square feet in one box and round up. Box coverage is printed on the carton and differs from product to product, so the calculator asks for it instead of guessing. You cannot buy part of a box, so the last box is usually where your spare boards come from.
How do I calculate flooring for an L-shaped room?
Split the room into two rectangles, measure each one and enter them as two rooms. The calculator adds them together. The same works for a room with a closet or an alcove: measure the main rectangle, then the smaller one. Use the area to leave out for a kitchen island or anything else the floor stops at.
Do I need underlayment, and how much?
Laminate and many floating floors go over an underlayment unless the plank has a pad attached, and the manufacturer's instructions say which you need. Underlayment covers the floor area itself, so it does not need the same cutting allowance as the planks. Divide the floor area by the coverage printed on the roll and round up.
How is carpet measured and sold?
Carpet is priced by the square yard, which is 9 square feet, and it comes off a roll of fixed width. The most common width is 12 ft, with 13 ft 6 in and 15 ft sometimes available. Because you buy the full width of the roll for the length you need, a room narrower than the roll leaves an offcut. The calculator shows both the square yards by area and the linear feet off the roll.
Should I round up to a full box even if I only need a little more?
Yes. Flooring is sold in whole boxes, and boards from a later production run can differ slightly in color. Having a few spare boards from the same run is what makes a future repair blend in. Many stores take back unopened boxes, so check the return terms before you buy.
Sources
- AHF Products (Bruce, Armstrong Flooring), engineered hardwood installation instructions, cutting and grading allowance, checked 2026-11-20
- Pergo Extreme rigid vinyl plank installation instructions (Uniclic), checked 2026-11-20
- Inch Calculator, Flooring Calculator (waste by installation), checked 2026-11-20
- Inch Calculator, Carpet Calculator (roll widths, square yards, waste), checked 2026-11-20
Let your website write the quote
You just worked out a price by hand. This puts your price list to work on your website: a customer answers a few questions, the form works out the price from your own rates, and they get an itemized quote by email while you get the request. We set it up from your price list and host it for you, so there is no monthly fee to us.
- One quote request form for your business, with up to 10 questions and up to 15 priced items or options from your own price list
- The price worked out from your rates the moment the customer submits, with no reply needed from you
- An itemized quote emailed to the customer in your business name and colors, and an alert to you with every answer
- Every request saved to a Google Sheet that you own
- Added to your current website as an embed or a button, or delivered as its own page, with one round of changes
Turnaround: Live within 5 business days of getting your price list and logo.
You pay on Stripe's secure checkout page. We never see your card number.
Related Tools and Guides
- Tile calculator with grout and thinsetEnter the areas you are tiling and the tile size. You get the number of tiles and boxes to buy, with a waste allowance that follows the layout, plus bags of grout and thinset.
- Square footage calculator for odd-shaped roomsPick a shape, type the measurements in feet and inches, and add as many areas as the job has. You get the total in square feet, square yards, square meters and acres, plus the cost if you enter a price per square foot.
- Markup calculator for pricing the jobEnter any two of your cost, your selling price and your markup percent, and the calculator works out the third. It also shows the margin that markup produces, because the two are not the same number.
- Estimate template to send the customerEnter the job, the line items and how far the final cost could move, and get a clear estimate that says plainly it is an estimate. Save it as a PDF or print it, with no account and nothing uploaded.
- All free business toolsCalculators and generators for pricing, quoting and running a small business.