Square Footage Calculator

Pick a shape, type the measurements in feet and inches, and add as many areas as the job has. You get the total in square feet, square yards, square meters and acres, plus the cost if you enter a price per square foot.

Area 1

For a part you are not covering: a stairwell, a kitchen island, a pond.

Leave at 0 for the measured area only.

Material, labor or both. Leave at 0 to hide the cost.

Printed on the saved result.

Square footage

Your square footage

Total area

120 sq ft

Square yards

13.33

Square meters

11.15

Acres

0.0028

Square inches

17,280

Each area
AreaSq ft
Area 1: rectangle or square12 ft x 10 ft120
Total120 sq ft
How we calculated this

Every measurement is turned into decimal feet first: feet plus inches divided by 12.

  • Rectangle or square: length x width.

Each area is multiplied by its quantity. Areas marked as taken away are subtracted, and the total never goes below zero.

Square yards are square feet divided by 9. Square meters are square feet times 0.09290304. Acres are square feet divided by 43,560.

The extra percentage and the price are your own inputs. The cost is the area to order times your price per square foot.

Conversion factors: NIST Special Publication 811, Appendix B.9, conversion factors for area, checked 2026-11-20.

Save your result

Example: an L-shaped living room with a hearth

An L-shaped living room measuring 15 ft 6 in x 12 ft plus 6 ft x 4 ft 3 in is 211.5 square feet. Take away a 3 ft x 2 ft hearth (6 square feet) and the floor is 205.5 square feet, which is 22.83 square yards or 19.09 square meters. With 10% extra for cuts you would order 226.05 square feet of flooring, and at an example price of $4.50 a square foot that comes to $1,017.23.

Example square footage

Total area

205.5 sq ft

2 areas added and subtracted.

Square yards

22.83

Square meters

19.09

Acres

0.0047

Square inches

29,592

Each area
AreaSq ft
Area 1: l-shape15 ft 6 in x 12 ft plus 6 ft x 4 ft 3 in211.5
Area 2: rectangle or square3 ft x 2 ft, taken away-6
Total205.5 sq ft
Ordering and cost
ItemAmount
Area to order205.5 sq ft plus 10% extra226.05 sq ft
Cost226.05 sq ft at $4.50 per sq ft$1,017.23
How we calculated this

Every measurement is turned into decimal feet first: feet plus inches divided by 12.

  • L-shape: split the L into two rectangles: (A length x A width) + (B length x B width).
  • Rectangle or square: length x width.

Each area is multiplied by its quantity. Areas marked as taken away are subtracted, and the total never goes below zero.

Square yards are square feet divided by 9. Square meters are square feet times 0.09290304. Acres are square feet divided by 43,560.

The extra percentage and the price are your own inputs. The cost is the area to order times your price per square foot.

Conversion factors: NIST Special Publication 811, Appendix B.9, conversion factors for area, checked 2026-11-20.

How to calculate square footage

Square footage is the length of a space times its width, with both measured in feet. A room 12 feet by 10 feet is 120 square feet. Everything else is a variation on that: turn inches into feet, break an odd space into simple shapes, and add the pieces.

To turn feet and inches into feet, divide the inches by 12. A wall that measures 15 feet 6 inches is 15.5 feet, and one that measures 4 feet 3 inches is 4.25 feet. The calculator does this for you, so type the tape reading as it is.

The formula for each shape

  • Rectangle or square: length x width.
  • Triangle: base x height / 2, where the height is measured straight up from the base, not along a sloped side.
  • Circle: 3.1416 x radius x radius, where the radius is half the distance across.
  • Trapezoid: add the two parallel sides, divide by 2, and multiply by the distance between them.
  • L-shape: two rectangles added together.

L-shaped rooms and odd layouts

Most real jobs are not one rectangle. Sketch the space, draw lines that cut it into rectangles, triangles and circles, and measure each piece. Add an area in the calculator for each piece. If three bedrooms are the same size, enter one and set the quantity to 3.

Some parts should come out of the total: a hearth, a stairwell, a kitchen island, a tree ring in a lawn. Add the part as its own area and switch on "Take this area away". Each area keeps its own line in the result, so a wrong tape reading is easy to spot.

A worked example

An L-shaped living room has a main part of 15 feet 6 inches by 12 feet and a nook of 6 feet by 4 feet 3 inches. The main part is 15.5 x 12 = 186 square feet. The nook is 6 x 4.25 = 25.5 square feet. Together that is 211.5 square feet. A 3 by 2 foot hearth takes away 6 square feet, which leaves 205.5 square feet of floor. That is 205.5 / 9 = 22.83 square yards, or 205.5 x 0.09290304 = 19.09 square meters.

Square yards, square meters and acres

One square yard is 9 square feet, so divide by 9. One square foot is exactly 0.09290304 square meters, so multiply by that. One acre is 43,560 square feet, so divide by 43,560. The calculator shows all four at once, because a carpet supplier, a tile importer and a land listing each use a different one.

From square feet to an order and a price

The measured area is rarely the amount you buy. Flooring, tile, sod and pavers all lose material to cuts, so add a percentage on top and order that figure. How much to add depends on the material and the layout, so the calculator leaves it at zero until you set it. The material calculators linked below start from a published allowance for each product.

Enter a price per square foot and the result shows the cost of the area you will order. The price can be the material alone or your installed rate. If you quote by the square foot every week, put the same math in front of your customers: start with the free quote template, or see the offer below for a quote form that prices the job on your own website.

Common Questions

How do I calculate square footage?

Measure the length and the width in feet and multiply them. A room 12 feet long and 10 feet wide is 120 square feet. If a measurement has inches, divide the inches by 12 and add them to the feet first, so 12 feet 6 inches becomes 12.5 feet.

How many square feet is a 12x12 room?

A 12 by 12 foot room is 144 square feet, because 12 times 12 is 144. That is 16 square yards, or about 13.4 square meters.

How do I calculate the square footage of an L-shaped room?

Split the L into two rectangles that do not overlap, work out each one as length times width, and add the two. An L made of a 15.5 by 12 foot part and a 6 by 4.25 foot part is 186 plus 25.5, so 211.5 square feet. In the calculator, pick L-shape, or add each rectangle as its own area.

How do I convert square feet to square yards?

Divide the square feet by 9, because a square yard is 3 feet by 3 feet. 180 square feet is 20 square yards. Carpet and some sod are sold by the square yard, so this is the number those suppliers ask for.

How many square feet are in an acre?

One acre is 43,560 square feet. To turn square feet into acres, divide by 43,560, so a 10,000 square foot lot is about 0.23 acres.

How do I convert square feet to square meters?

Multiply the square feet by 0.09290304, the exact factor published by NIST. 200 square feet is 18.58 square meters.

How do I work out a cost from a price per square foot?

Multiply the area you will order by the price per square foot. If you add extra for waste, price the larger figure, because that is what you pay for. 226 square feet at $4.50 a square foot is $1,017.

How do I measure a room with a closet, a bay or a cut-out?

Treat each part as its own shape. Add the closet or bay as a second area, and mark a part you are not covering, such as a stairwell or a kitchen island, as an area to take away. The calculator shows each part on its own line so you can check it against your tape.

Online Quote Form Setup

Let your website write the quote

You just worked out a price by hand. This puts your price list to work on your website: a customer answers a few questions, the form works out the price from your own rates, and they get an itemized quote by email while you get the request. We set it up from your price list and host it for you, so there is no monthly fee to us.

  • One quote request form for your business, with up to 10 questions and up to 15 priced items or options from your own price list
  • The price worked out from your rates the moment the customer submits, with no reply needed from you
  • An itemized quote emailed to the customer in your business name and colors, and an alert to you with every answer
  • Every request saved to a Google Sheet that you own
  • Added to your current website as an embed or a button, or delivered as its own page, with one round of changes
$395one time

Turnaround: Live within 5 business days of getting your price list and logo.

You pay on Stripe's secure checkout page. We never see your card number.