Gravel Calculator

Enter the area, the depth and the type of gravel. You get the amount to order in cubic yards, tons and bags, with the published weight behind the tons shown, and the cost if you enter a price.

Shape of the area

How thick the gravel layer will be.

Each weight is a published loose weight. Pick the last option to enter your supplier's figure.

A planning allowance. Set it to 0 for the bare volume.

For buying by the bag.

Leave at 0 to hide the cost.

Printed on the saved result.

Gravel estimate

Your gravel order

Gravel to order

2.04 cu yd

200 sq ft at 3 in deep, with 10% extra.

Tons

2.75

Bags, 50 lb

110

Cubic feet

55

Pounds

5,500

How the order adds up
StepResult
Area20 ft x 10 ft rectangle200 sq ft
Volume as measuredArea x 3 in / 12, then / 271.85 cu yd
Volume to orderPlus 10% extra2.04 cu yd
WeightCrushed gravel, 1 inch and smaller, 2,700 lb per cu yd. Source: Caltrans2.75 tons
How we calculated this

Volume. Area in square feet times depth in feet (inches divided by 12) gives cubic feet. Divide by 27 for cubic yards. Your extra percentage is added on top.

Weight. Cubic yards times the loose weight of the gravel you picked. Tons are pounds divided by 2,000. This result uses 2,700 lb per cubic yard, a published figure from Caltrans.

Bags. Pounds divided by the bag weight, rounded up to a whole bag. The starting bag weight is 50 lb, the size QUIKRETE lists for its All-Purpose Gravel.

What this is not.The weights are published loose weights, not measurements of your supplier's stone. Wet gravel weighs more, and a quarry's own figure can differ, so ask for their tons per cubic yard and enter it. The extra percentage starts at a round 10% for planning. It is not a measured statistic.

Save your result

Example: a 20 by 10 foot pad, 3 inches deep

A 20 ft x 10 ft rectangle covered 3 inches deep is 200 square feet and 1.85 cubic yards of gravel. With 10% extra, order 2.04 cubic yards. As crushed gravel at 2,700 pounds per cubic yard (the loose weight Caltrans publishes) that is 2.75 tons, or 110 bags of 50 pounds.

Example gravel order

Gravel to order

2.04 cu yd

200 sq ft at 3 in deep, with 10% extra.

Tons

2.75

Bags, 50 lb

110

Cubic feet

55

Pounds

5,500

How the order adds up
StepResult
Area20 ft x 10 ft rectangle200 sq ft
Volume as measuredArea x 3 in / 12, then / 271.85 cu yd
Volume to orderPlus 10% extra2.04 cu yd
WeightCrushed gravel, 1 inch and smaller, 2,700 lb per cu yd. Source: Caltrans2.75 tons
How we calculated this

Volume. Area in square feet times depth in feet (inches divided by 12) gives cubic feet. Divide by 27 for cubic yards. Your extra percentage is added on top.

Weight. Cubic yards times the loose weight of the gravel you picked. Tons are pounds divided by 2,000. This result uses 2,700 lb per cubic yard, a published figure from Caltrans.

Bags. Pounds divided by the bag weight, rounded up to a whole bag. The starting bag weight is 50 lb, the size QUIKRETE lists for its All-Purpose Gravel.

What this is not.The weights are published loose weights, not measurements of your supplier's stone. Wet gravel weighs more, and a quarry's own figure can differ, so ask for their tons per cubic yard and enter it. The extra percentage starts at a round 10% for planning. It is not a measured statistic.

How much gravel do I need?

Gravel is a volume: the area in square feet times the depth in feet, divided by 27 to get cubic yards. Depth is usually measured in inches, so divide it by 12 first. If your supplier sells by the ton, multiply the cubic yards by the weight of a cubic yard of that gravel.

Written out:

  • Cubic feet = square feet x (depth in inches / 12).
  • Cubic yards = cubic feet / 27.
  • Tons = cubic yards x pounds per cubic yard / 2,000.
  • Bags = pounds / pounds per bag, rounded up.

A worked example

A parking pad is 20 feet by 10 feet and gets 3 inches of crushed gravel. The area is 200 square feet, and 3 inches is 0.25 feet, so the volume is 50 cubic feet. Divide by 27 and that is 1.85 cubic yards. With 10% extra the order is 55 cubic feet, or 2.04 cubic yards. Loose crushed gravel is listed at 2,700 pounds per cubic yard, so the order weighs 5,500 pounds, which is 2.75 tons. In 50 pound bags that would be 110 bags, which is why a job this size is delivered in bulk.

The weight behind the tons

The step that goes wrong most often is the weight. Many calculators use one figure for every kind of gravel and do not say where it comes from. This one uses published loose weights and names the source next to the result:

  • Crushed gravel, 1 inch and smaller: 2,700 pounds per cubic yard (Caltrans).
  • Crushed granite: 2,600 pounds per cubic yard (Caltrans).
  • Crushed limestone: 2,550 pounds per cubic yard (Caltrans).
  • Screenings: 2,400 pounds per cubic yard (Caltrans).
  • Gravel, 1/4 inch to 2 inches: 1.42 tons per cubic yard (New Mexico Mining and Minerals Division).
  • Base course: 1.25 tons per cubic yard (New Mexico Mining and Minerals Division).

Neither table lists pea gravel or river rock by name. Both fall in the 1/4 inch to 2 inch size range, so that line is the closest published match. These are loose weights for dry material. Wet gravel weighs more, and stone from your local quarry can differ from a state table, so if the supplier gives you tons per cubic yard, pick "My supplier's weight" and enter it.

How much extra to order

The calculator starts with 10% extra for spillage, uneven ground and settling. That is a round planning number, not a measured statistic, and you can set it to anything, including zero. Gravel that will be compacted with a plate compactor ends up thinner than it was spread, so a compacted base needs more than a loose decorative layer. Ask the supplier what they allow for the product you are buying.

Pricing the job

Enter a price per ton, per cubic yard or per bag and the result shows the material cost for the order. Delivery is usually charged on top, so add it to your quote as its own line. For an area that is not a simple rectangle, circle or triangle, total it with the square footage calculator and enter the area here. If you price gravel jobs every week, the offer below puts this math on your own website as a quote form.

Common Questions

How much gravel do I need?

Multiply the area in square feet by the depth in feet, then divide by 27 to get cubic yards. A 20 by 10 foot area covered 3 inches deep is 200 x 0.25 = 50 cubic feet, which is 1.85 cubic yards. Add an allowance for waste and settling, then multiply by the gravel's weight per cubic yard if your supplier sells by the ton.

How many tons are in a cubic yard of gravel?

It depends on the gravel. Caltrans lists loose crushed gravel at 2,700 pounds per cubic yard, which is 1.35 tons, crushed granite at 2,600 pounds and crushed limestone at 2,550 pounds. The New Mexico Mining and Minerals Division lists gravel from 1/4 inch to 2 inches at 1.42 tons per cubic yard. Ask your quarry for its own figure, because moisture and rock type move it.

How much area does a ton of gravel cover?

At the 2,700 pounds per cubic yard Caltrans lists for loose crushed gravel, one ton is 0.74 cubic yards, or 20 cubic feet. Spread 2 inches deep that covers 120 square feet, and spread 3 inches deep it covers 80 square feet.

How much does a cubic yard of gravel cover?

A cubic yard is 27 cubic feet. It covers 162 square feet at 2 inches deep, 108 square feet at 3 inches deep and 81 square feet at 4 inches deep.

How many bags of gravel are in a cubic yard?

Divide the weight of a cubic yard by the weight of a bag. At 2,700 pounds per cubic yard, a cubic yard is 54 bags of 50 pounds, the bag size QUIKRETE lists for its All-Purpose Gravel. Bags make sense for small jobs, and bulk delivery by the yard or ton for anything larger.

Is gravel sold by the cubic yard or by the ton?

Both. Landscape yards often sell by the cubic yard and quarries usually sell by the ton, because trucks are weighed on a scale. The calculator shows both so you can order either way and check one against the other.

Why do gravel calculators give different tonnage for the same area?

Because each one assumes a different weight per cubic yard, and most do not say where the number comes from. Published loose weights for common gravel run from 2,400 to 3,240 pounds per cubic yard in the two government tables this calculator uses. The result shows which weight was used and its source, and you can replace it with your supplier's figure.

Online Quote Form Setup

Let your website write the quote

You just worked out a price by hand. This puts your price list to work on your website: a customer answers a few questions, the form works out the price from your own rates, and they get an itemized quote by email while you get the request. We set it up from your price list and host it for you, so there is no monthly fee to us.

  • One quote request form for your business, with up to 10 questions and up to 15 priced items or options from your own price list
  • The price worked out from your rates the moment the customer submits, with no reply needed from you
  • An itemized quote emailed to the customer in your business name and colors, and an alert to you with every answer
  • Every request saved to a Google Sheet that you own
  • Added to your current website as an embed or a button, or delivered as its own page, with one round of changes
$395one time

Turnaround: Live within 5 business days of getting your price list and logo.

You pay on Stripe's secure checkout page. We never see your card number.